Série
EG930
ALU-POWER 2 Flute25°Helix Corner RadiusEnd mill(TiCN)
Corner RadiusPlain Shank
EDP de referência: EG930020
Características técnicas
Tool Material
Micro Grain Carbide
Flute
2Flute
Coating
TiCN
Helix
25°
TOL. of Radius1
0.01
Shank Type
Plain (YG-1 Standard)
Feature
- ▶Designed for the machining aluminum and its alloys, non
- ▶ferrous materials.
- ▶Increased tool life and higher cutting accuracy.
- ▶Maximum
- ▶stock removal, chip ejection, stability.
- ▶Corner Radius for avoiding the chipping.
- ▶Mirror face
- ▶excellent surface finish.
Operações aplicadas
Dimensões (20 itens)
Unidade: mmEDP No. | R Radius | D1 Outside Diameter | D2 Shank Diameter | L1 Length of Cut | L3 Length Below Shank | L2 Overall Length | Mill Dia. Tolerance | Shank Dia.Tolerance | No. of Flute | Taper Angle |
|---|---|---|---|---|---|---|---|---|---|---|
| EG930020 | R0.20 | 2 | 3 | 3 | 6 | 40 | 0~-0.030 | h5 | 2 | — |
| EG930020 | R0.20 | 2 | 3 | 3 | — | 40 | 0~-0.030 | h5 | 2 | — |
| EG930030 | R0.20 | 3 | 3 | 4 | 8 | 40 | 0~-0.030 | h5 | 2 | — |
| EG930030 | R0.20 | 3 | 3 | 4 | — | 40 | 0~-0.030 | h5 | 2 | — |
| EG930040 | R0.20 | 4 | 4 | 5 | 12 | 50 | 0~-0.030 | h5 | 2 | — |
| EG930040 | R0.20 | 4 | 4 | 5 | — | 50 | 0~-0.030 | h5 | 2 | — |
| EG930050 | R0.20 | 5 | 5 | 8 | 14 | 50 | 0~-0.030 | h5 | 2 | — |
| EG930050 | R0.20 | 5 | 5 | 8 | — | 50 | 0~-0.030 | h5 | 2 | — |
| EG930060 | R0.20 | 6 | 6 | 8 | 18 | 65 | 0~-0.030 | h5 | 2 | — |
| EG930060 | R0.20 | 6 | 6 | 8 | — | 65 | 0~-0.030 | h5 | 2 | — |
| EG930080 | R0.20 | 8 | 8 | 10 | 22 | 70 | 0~-0.030 | h5 | 2 | — |
| EG930080 | R0.20 | 8 | 8 | 10 | — | 70 | 0~-0.030 | h5 | 2 | — |
| EG930100 | R0.20 | 10 | 10 | 14 | 28 | 80 | 0~-0.030 | h5 | 2 | — |
| EG930100 | R0.20 | 10 | 10 | 14 | — | 80 | 0~-0.030 | h5 | 2 | — |
| EG930120 | R0.20 | 12 | 12 | 16 | 35 | 90 | 0~-0.030 | h5 | 2 | — |
| EG930120 | R0.20 | 12 | 12 | 16 | — | 90 | 0~-0.030 | h5 | 2 | — |
| EG930160 | R0.20 | 16 | 16 | 20 | 40 | 90 | 0~-0.030 | h5 | 2 | — |
| EG930160 | R0.20 | 16 | 16 | 20 | — | 90 | 0~-0.030 | h5 | 2 | — |
| EG930200 | R0.20 | 20 | 20 | 25 | 50 | 100 | 0~-0.030 | h5 | 2 | — |
| EG930200 | R0.20 | 20 | 20 | 25 | — | 100 | 0~-0.030 | h5 | 2 | — |