Série
SGED30
CRX S 2 Flute30°Helix Long NeckEnd mill
SquarePlain Shank
EDP de referência: SGED3000502
Características técnicas
Tool Material
Nano Grain Carbide
Flute
2Flute
Coating
DLC
Helix
30°
Shank Type
Plain (YG-1 Standard)
Feature
- ▶Designed for copper, copper alloys, soft graphite, reinforced plastics and materials affiliated with non
- ▶ferrous metals.
- ▶High toughness and minimized vibration applied from two step taper neck (under dia. 1.0mm)
- ▶Excellent surface roughness from special flute geometry for removing burrs
Operações aplicadas
Dimensões (45 itens)
Unidade: mmEDP No. | R Radius | D1 Outside Diameter | D2 Shank Diameter | L1 Length of Cut | L3 Length Below Shank | L2 Overall Length | Mill Dia. Tolerance | Shank Dia.Tolerance | No. of Flute | Taper Angle |
|---|---|---|---|---|---|---|---|---|---|---|
| SGED3000502 | — | 0.5 | 4 | 0.7 | 2 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3000504 | — | 0.5 | 4 | 0.7 | 4 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3000506 | — | 0.5 | 4 | 0.7 | 6 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3000508 | — | 0.5 | 4 | 0.7 | 8 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3000510 | — | 0.5 | 4 | 0.7 | 10 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3000602 | — | 0.6 | 4 | 0.9 | 2 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3000604 | — | 0.6 | 4 | 0.9 | 4 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3000606 | — | 0.6 | 4 | 0.9 | 6 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3000608 | — | 0.6 | 4 | 0.9 | 8 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3000610 | — | 0.6 | 4 | 0.9 | 10 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3000804 | — | 0.8 | 4 | 1.2 | 4 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3000806 | — | 0.8 | 4 | 1.2 | 6 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3000808 | — | 0.8 | 4 | 1.2 | 8 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3000810 | — | 0.8 | 4 | 1.2 | 10 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3000812 | — | 0.8 | 4 | 1.2 | 12 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3001004 | — | 1 | 4 | 1.5 | 4 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3001006 | — | 1 | 4 | 1.5 | 6 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3001008 | — | 1 | 4 | 1.5 | 8 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3001010 | — | 1 | 4 | 1.5 | 10 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3001012 | — | 1 | 4 | 1.5 | 12 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3001506 | — | 1.5 | 4 | 2.3 | 6 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3001508 | — | 1.5 | 4 | 2.3 | 8 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3001510 | — | 1.5 | 4 | 2.3 | 10 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3001512 | — | 1.5 | 4 | 2.3 | 12 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3001516 | — | 1.5 | 4 | 2.3 | 16 | 50 | 0~-0.012 | h5 | 2 | — |
| SGED3002008 | — | 2 | 4 | 3 | 8 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3002010 | — | 2 | 4 | 3 | 10 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3002012 | — | 2 | 4 | 3 | 12 | 45 | 0~-0.012 | h5 | 2 | — |
| SGED3002016 | — | 2 | 4 | 3 | 16 | 50 | 0~-0.012 | h5 | 2 | — |
| SGED3003008 | — | 3 | 6 | 4.5 | 8 | 50 | 0~-0.012 | h5 | 2 | — |
| SGED3003010 | — | 3 | 6 | 4.5 | 10 | 50 | 0~-0.012 | h5 | 2 | — |
| SGED3003012 | — | 3 | 6 | 4.5 | 12 | 50 | 0~-0.012 | h5 | 2 | — |
| SGED3003016 | — | 3 | 6 | 4.5 | 16 | 60 | 0~-0.012 | h5 | 2 | — |
| SGED3003020 | — | 3 | 6 | 4.5 | 20 | 60 | 0~-0.012 | h5 | 2 | — |
| SGED3004010 | — | 4 | 6 | 6 | 10 | 50 | 0~-0.012 | h5 | 2 | — |
| SGED3004012 | — | 4 | 6 | 6 | 12 | 50 | 0~-0.012 | h5 | 2 | — |
| SGED3004016 | — | 4 | 6 | 6 | 16 | 60 | 0~-0.012 | h5 | 2 | — |
| SGED3004020 | — | 4 | 6 | 6 | 20 | 60 | 0~-0.012 | h5 | 2 | — |
| SGED3004025 | — | 4 | 6 | 6 | 25 | 60 | 0~-0.012 | h5 | 2 | — |
| SGED3006020 | — | 6 | 6 | 8 | 20 | 60 | 0~-0.012 | h5 | 2 | — |
| SGED3006030 | — | 6 | 6 | 8 | 30 | 90 | 0~-0.012 | h5 | 2 | — |
| SGED3008020 | — | 8 | 8 | 12 | 20 | 70 | 0~-0.015 | h5 | 2 | — |
| SGED3010025 | — | 10 | 10 | 15 | 25 | 80 | 0~-0.015 | h5 | 2 | — |
| SGED3012025 | — | 12 | 12 | 18 | 25 | 80 | 0~-0.015 | h5 | 2 | — |
| SGED3012030 | — | 12 | 12 | 18 | 25 | 80 | 0~-0.015 | h5 | 2 | — |