Série

XRBA

i-Xmill CORNER RADIUS INSERTS FOR HARDENED STEEL

Corner Radius

EDP de referência: XRBA080 03

Características técnicas

Tool Material

Nano Grain Carbide

Flute

2Flute

Coating

Z-Coating

▶The optimum geometry of the tool to achieve the better reliability and less vibration and cutting load.
▶Interchangeability with i-Xmill ball holder, but the precise cutting is possible with i-Xmill corner radius holder due to higher stability and strength of tool.
▶The various and wide cutting range makes it possible to machine over the roughing and finishing.
▶Special coating makes high hardness with high thermal stability against oxidation.
▶Three Types of Inserts are available
▶For General Purpose (~HRc50)
▶For Hardened Material (HRc40~HRc65)
▶For Graphite

Unidade: mm

EDP No.	D Outside Diameter	R Overall Length	H Height	T Thickness
XRBA080 03	8	R0.30	—	2.4
XRBA080 05	8	R0.50	—	2.4
XRBA080 10	8	R1.0	—	2.4
XRBA100 05	10	R0.50	—	2.7
XRBA100 10	10	R1.0	—	2.7
XRBA100 20	10	R2.0	—	2.7
XRBA120 05	12	R0.50	—	3.2
XRBA120 10	12	R1.0	—	3.2
XRBA120 20	12	R2.0	—	3.2
XRBA130 05	13	R0.50	—	3.2
XRBA130 10	13	R1.0	—	3.2
XRBA130 20	13	R2.0	—	3.2
XRBA160 05	16	R0.50	—	4.2
XRBA160 10	16	R1.0	—	4.2
XRBA160 20	16	R2.0	—	4.2
XRBA170 05	17	R0.50	—	4.2
XRBA170 10	17	R1.0	—	4.2
XRBA170 20	17	R2.0	—	4.2
XRBA200 05	20	R0.50	—	5.2
XRBA200 10	20	R1.0	—	5.2
XRBA200 20	20	R2.0	—	5.2
XRBA210 05	21	R0.50	—	5.2
XRBA210 10	21	R1.0	—	5.2
XRBA210 20	21	R2.0	—	5.2
XRBA250 05	25	R0.50	—	6.2
XRBA250 10	25	R1.0	—	6.2
XRBA250 20	25	R2.0	—	6.2
XRBA260 05	26	R0.50	—	6.2
XRBA260 10	26	R1.0	—	6.2
XRBA260 20	26	R2.0	—	6.2
XRBA300 05	30	R0.50	—	7.2
XRBA300 10	30	R1.0	—	7.2
XRBA300 20	30	R2.0	—	7.2
XRBA320 05	32	R0.50	—	7.2
XRBA320 10	32	R1.0	—	7.2
XRBA320 20	32	R2.0	—	7.2